Find IP Address on Vivotek Camera

If you own a Vivotek camera and need to access its settings or monitor its feed remotely, knowing the camera’s IP address is essential. The IP address serves as a unique identifier for networked devices and allows you to connect to your camera through a web browser or surveillance software.

In this comprehensive guide, we will walk you through the steps to find the IP address on Vivotek cameras, enabling you to easily manage and control your camera’s functionality.

1. Understanding IP Addresses

Before diving into the process of finding the IP address on Vivotek cameras, let’s briefly understand what an IP address is. An IP address is a numerical label assigned to each device connected to a computer network. It acts as an identifier, allowing devices to communicate with each other and share information over the network.

2. Locating the IP Address on Vivotek Cameras

Finding the IP address on your Vivotek camera involves a few simple steps. Follow the instructions below to locate the IP address:

Step 1: Physical Connection Ensure that your Vivotek camera is properly connected to your network. This typically involves connecting the camera to a power source and connecting an Ethernet cable from the camera to your router or network switch.

Step 2: IP Scanning Tools Use an IP scanning tool to discover the IP address assigned to your Vivotek camera. There are various IP scanning tools available, such as Advanced IP Scanner, Angry IP Scanner, or Fing. Download and install one of these tools on your computer or mobile device.

Step 3: Running the IP Scanning Tool Launch the IP scanning tool and let it scan your network for connected devices. The tool will display a list of all devices currently connected to your network, along with their corresponding IP addresses.

Step 4: Identifying Your Vivotek Camera Look for the device name or manufacturer information in the IP scanning tool’s list. Identify your Vivotek camera from the list of connected devices. The camera’s name or model number should be displayed, making it easy to locate.

Step 5: Noting the IP Address Once you have identified your Vivotek camera, note down the IP address associated with it. The IP address will be a series of numbers separated by periods (e.g., 192.168.0.100).

3. Accessing Your Vivotek Camera

Now that you have successfully found the IP address of your Vivotek camera, you can access it using a web browser or surveillance software. Here’s how to proceed:

Step 1: Opening a Web Browser Launch your preferred web browser on your computer or mobile device. Ensure that the device is connected to the same network as the Vivotek camera.

Step 2: Entering the IP Address In the address bar of your web browser, type the IP address you noted down earlier. Press Enter or hit Go to initiate the connection.

Step 3: Logging In If prompted, enter the appropriate login credentials to access the camera’s settings. By default, the username and password for Vivotek cameras are often set to “admin.” However, it is crucial to change these default credentials to ensure the security of your camera.

Step 4: Exploring Camera Settings Once logged in, you will have access to the camera’s configuration interface. From here, you can adjust various settings, such as image quality, motion detection, recording options, and network configurations.

Locating the IP address on your Vivotek camera is a fundamental step in effectively managing and accessing your camera’s functionalities. By following the step-by-step process outlined in this article, you can quickly find the IP address of your Vivotek camera using IP scanning tools, and then access and configure the camera through a web browser or surveillance software. 

Remember to ensure the security of your camera by changing the default login credentials. Now, you are ready to make the most out of your Vivotek camera and enjoy the benefits of remote monitoring and control.